Download Alcatel OneTouch Pop 7 P310A Stock ROM Firmware

Here is the Alcatel OneTouch Pop 7 P310A firmware that you can download and install on your device. We also provide tutorial to install the Alcatel OneTouch Pop 7 P310A stock ROM from our dedicated tutorial section provided on this post.

The benefits of installing Alcatel stock ROM is of course to bring your phone back to its original settings. And then to fix any possible technical errors such as bootloop, soft bricked and etc.

Alcatel Stock ROM Firmware

So you are recommended to install the Alcatel OneTouch Pop 7 P310A stock ROM and that will also erase your existing personal data, therefore make backup first.

And let’s download and install the stock ROM by continuing reading this post right now.

Download Alcatel OneTouch Pop 7 P310A firmware (Flash file)

See the following stock ROM information.

  • File name of stock ROM:
  • Android Version: Android 4.2.2.
  • File size: 632 MB.


How to flash Alcatel OneTouch Pop 7 P310A firmware using SP Flash Tool

Before going to the steps, here are what you need to have and do first.

  • A computer.
  • A USB data cable.
  • SP Flash Tool.
  • Backup your personal data.

Notes. Make sure you follow the entire steps without skipping any of them or you might end up bricking your device.

Step 1 — Download SP Flash tool and extract it to your computer.

Step 2 — On your computer, head to the SP Flash Tool folder, then find and right-click onĀ Flash Tool to select Run As Administrator, this will open the SP Flash Tool.

Open SP Flash Tool

Step 3 — Once SP Flash Tool is opened, choose Download tab, and then select the Scatter Loading button to grab your Scatter File (.txt extension) from your computer.

Select Scatter File MTK

Step 4 — You need to click the Android_Scatter file.

SP Flash Tool Scatter File

Step 5 — SP Flash Tool will load the Scatter File.

Step 6 — After the scatter file is loaded by SP Flash Tool, you can now click the Download button.

SP Flash Tool Download

Step 7 — Now turn off your Android device — and remove its battery if it’s removable and if not just turn it off.

Power Off Android Device

Step 8 — You need to connect your Android device to PC now using a USB data cable.

Connect Android To PC

Step 9 — Now press Volume UP or Volume Down to fasten the connection between your Android device and computer.

Step 10 — When your Android device is connected, then SP Flash Tool will begin flashing your Android scatter file and will show a progress bar in yellow color.

Yellow Progress Bar SP Flash Tool MTK

Step 11 — This is the picture showing that the scatter file was successfully installed on your Android device.

Successfully Installed Scatter File SP Flash Tool

Step 12 — You can now disconnect your device from your computer.


{1}. Make backups. Do not forget to make necessary backups toward your existing personal data before installing the stock ROM.

{2}. Install original IMEI. Once you have done installing the stock ROM then you need to install the original IMEI if it’s included in the firmware zip file.

{3} If you want more firmware, then you are invited to visit our Alcatel stock ROM firmware page.

{4}. Credits go to the Alcatel for providing this stock ROM firmware.

Leave a Comment